RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 0.4

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 6 LBS

VOLT: 220/460

Dia. SHANK: 1/4"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 1 or 1.5

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 8 / 9 lbs

VOLT: 220/460

Dia. SHANK: 3/8"-1/2"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 2 or 3

RPM: 18,000-24,000

RPM MAX: 24.000
WEIGHT: 15 / 18 lbs

VOLT: 220/380/460

Dia. SHANK: 1/2"-5/8"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 3.5 or 7.5

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 23 / 29 / 29 lbs

VOLT: 220/380/460

Dia. SHANK: 5/8"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 10

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 40 lbs

VOLT: 220/380/460

Dia. SHANK: 5/8"-3/4"-1"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 10

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 56 lbs

VOLT: 220/380/460

Dia. SHANK: 3/4"-1"

RV manual tool change spindles are equipped with an axial fan directly fitted on the shaft.  This provides the correct air volume for cooling corresponding to the shaft rpm.

HP: 12 or 16

RPM: 18,000-24,000

RPM MAX: 24.000

WEIGHT: 86 / 93 lbs

VOLT: 220/380/460

Dia. SHANK: 3/4"-1"