 |
|
|
TMPE 0 6/2 This series is equipped for ER collets, but with a spindle on each end (double shaft) for different applications. They are also equipped with 2 sets of high precision angular ball bearings to support heavy axial and radial loads. The bearings are cooled by compressed air.
HZ: 200-300
rpm: 12000-18000
kw: 0.15-0.16
volts: 220/380
ER: 11
|
TMPE 3 This series is equipped for ER collets, but with a spindle on each end (double shaft) for different applications. They are also equipped with 2 sets of high precision angular ball bearings to support heavy axial and radial loads. The bearings are cooled by compressed air.
HZ: 50-300
rpm: 3000-18000
kw: 0.20-2.00
volts: 220/380
ER: 25
|
TMPE 4 This series is equipped for ER collets, but with a spindle on each end (double shaft) for different applications. They are also equipped with 2 sets of high precision angular ball bearings to support heavy axial and radial loads. The bearings are cooled by compressed air.
HZ: 50-300
rpm: 3000-18000
kw: 0.65-6.60
volts: 220/380
ER: 32
|
TMPE 5 This series is equipped for ER collets, but with a spindle on each end (double shaft) for different applications. They are also equipped with 2 sets of high precision angular ball bearings to support heavy axial and radial loads. The bearings are cooled by compressed air.
HZ: 50-300
rpm: 3000-18000
kw: 1.25-7.00
volts: 220/380
ER: 32
|
TMPE 4 This series of electric spindles are made on a very sturdy base to withstand high mechanical stress. These spindles have a front coupled set of angular contact ball bearings with heavy axial and radial pre-load.
HZ: 50-100
rpm: 3000-18000
kw: 0.65-2.20
volts: 220/380
|
TMPE 6 This series of electric spindles are made on a very sturdy base to withstand high mechanical stress. These spindles have a front coupled set of angular contact ball bearings with heavy axial and radial pre-load.
HZ: 50-100
rpm: 3000-18000
kw: 2.90-6.65
volts: 220/380
|
TMPE 8 This series of electric spindles are made on a very sturdy base to withstand high mechanical stress. These spindles have a front coupled set of angular contact ball bearings with heavy axial and radial pre-load.
HZ: 50-100
rpm: 3000-18000
kw: 8.20-16.4
volts: 220/380
|
TMPE 0 This series of electric spindles, equipped for ER collets, is used in applications for milling, drilling and cutting. They are equipped with 2 sets of high precison angular ball bearings to support heavy axial and radial loads.
HZ: 100-400
rpm: 6000-24000
kw: 0.08-0.40
volts: 220/380
ER: 11
|
TMPE 1 / 2 This series of electric spindles, equipped for ER collets, is used in applications for milling, drilling and cutting. They are equipped with 2 sets of high precison angular ball bearings to support heavy axial and radial loads.
HZ: 50-300
rpm: 6000-18000
kw: 0.07-0.75
volts: 220/380
ER: 20
|
TMPE 3 This series of electric spindles, equipped for ER collets, is used in applications for milling, drilling and cutting. They are equipped with 2 sets of high precison angular ball bearings to support heavy axial and radial loads.
HZ: 50-400
rpm: 3000-24000
kw: 0.20-2.00
volts: 220/380
ER: 25
|
TMPE 4 This series of electric spindles, equipped for ER collets, is used in applications for milling, drilling and cutting. They are equipped with 2 sets of high precison angular ball bearings to support heavy axial and radial loads.
HZ: 50-400
rpm: 3000-24000
kw: 0.65-5.60
volts: 220/380
ER: 25, ER 32
|
TMPE 5 This series of electric spindles, equipped for ER collets, is used in applications for milling, drilling and cutting. They are equipped with 2 sets of high precison angular ball bearings to support heavy axial and radial loads.
HZ: 50-400
rpm: 3000-24000
kw: 1.25-7.00
volts: 220/380
ER: 25, ER 32
|
|
|
 |
|
|
