Two drill spindles for heavy and two boring spindles for light applications. (e.g. machining of entry doors on all four edges.)

Maximum RPM input:  12.500 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque input: 30 Nm

Maximum Torque output: 25 Nm

Gear ratio: 1:1,2

Maximum Temperature: 85°C / 185F

Weight: approx. 4Kg

Boring, drilling, routing and sawing at a user-defined fixed angle in the A-axis, e.g. for edge beveling.

Maximum RPM input: 15.000 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque: 25 Nm

Gear ratio: 1:1

Maximum Temperature: 85°C/185°F

Weight: approx. 4kg

Aggregate can be rotated 360°

Horizontal drilling and routing. (e.g. for drilling anchor holes or routing lock recesses.)


Maximum RPM input: 12.5000 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque input: 30 Nm

Maximum Torque output: 25 Nm

Gear ratio: 1:1,2 and 1:0,73

Maximum Temperature: 85°C / 185F

Weight: approx. 4 kg

This aggregate, with its recessed spindle output is ideal for horizontal machining with long tools, where limited room in the X or Y stroke would otherwise present a problem. (e.g. mortise lock machining on doors.)

Maximum RPM input: 12.500 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque input: 30 Nm

Maximum Torque output: 25 Nm

Gear ratio: 1:1,2

Maximum Temperature: 85°C / 185F

Weight: approx. 4 Kg

Aggregate can be rotated 360°

Maximum acceleration 120 1/s²

Horizontal spindle outputs vertical sawing and routing. (e.g. for slotting and pocketing.)

Maximum RPM input: 12.500 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque input: 30 Nm

Maximum Torque output: 25 Nm

Gear ration: 1:1,2 to 1:0,73

Maximum Temperature: 85°C / 185F

Weight: approx. 4 Kg

Drilling/Boring, routing and sawing at any angle.  The A-axis is manually adjustable from -100° to +100°. (e.g. for any and all angled machining.)

Maximum RPM input: 15.000 1/min

Maximum RPM output: 15.000 1/min

Maximum Torque: 25 Nm

Gear ratio: 1:1

Maximum Temperature: 85°C / 185F

Weight: approx. 5Kg

Aggregate can be rotated 360°

For heavy duty molding or profiling applications.  This aggregate can be equipped with saw blade packages or profile cutters. (e.g. profiling of surfaces.)

Maximum RPM input: 14.000 1/min

Maximum RPM output: 10.000 1/min

Maximum Torque input: 18 Nm

Maximum Torque output: 25 Nm

Gear ratio: 1:0,718

Maximum Temperature: 85°C / 185F

Weight: approx. 10,5Kg

Used for providing cutting down vertical depth of cut or to make more accurate profiling edge on a part to uneven surfaces. ( ex.: engraving )

Maximum RPM input: 18.000 1/min

Maximum Torque input: 20 Nm

Gear ratio: 1:1

Maximum Temperature: 85°C / 185F

Weight: approx. 6Kg

Maximun acceleration  120 1/s2